Displaying Translation Statistics - Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual

Displaying Translation Statistics

The show ip nat statistics command displays internal statistics that apply to NAT
operation.
show ip nat statistics
host1#show license nat
Nat license is nat_license
See show license.
Use to display internal NAT statistics.
Field descriptions
Last dynamic allocation failure Completion level of any dynamic allocation
failures; the number of times the router attempted dynamic allocation but
reached the dynamic allocation entry limit
Current static translation entries
Inside Source Simple Number of inside source simple static translations
Outside Source Simple Number of outside source simple static
translations
Inside Source Extended Number of inside source extended static
translations
Outside Source Extended Number of outside source extended static
translations
Dynamic Translation Type Type of dynamic translation (inside source
simple, outside source simple, inside source extended )
Current Current number of dynamic translations of the associated
translation type
Peak Peak number of dynamic translations of the associated translation
type
Accumulated Accumulated number of dynamic translations of the associated
type; this value reflects the accumulation of dynamic translations since the
last router reboot operation
Failed Total number of installation attempts that failed for an associated
translation type
Forwarding statistics for packets received on inside or outside interfaces
forwarded directly Number of packets forwarded directly (that is,
without the need of translation)
forwarded through translator Number of packets forwarded through
the NAT translator
Chapter 2: Configuring NAT
89
Monitoring NAT