Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 336

For e series broadband services routers - ip services configuration
Table of Contents

Advertisement

JUNOSe 11.0.x IP Services Configuration Guide
310
Monitoring DVMRP/IPSec, GRE/IPSec, and L2TP/IPSec Tunnels
Virtual router Virtual router on which this profile is configured
Application Type of application the connection can protect
pfs group PFS group being used for the connection
Mtu Tunnel's MTU size
Local address Local endpoint address
Remote address Remote endpoint address
Local identity Shows the subnet, protocol, and port
Remote identity Shows the subnet, protocol, and port
Inbound spi Inbound security parameter index
Inbound transform Inbound algorithm
Inbound lifetime Inbound configured lifetime in seconds and kilobytes
Outbound spi Outbound security parameter index
Outbound transform Outbound algorithm
Outbound lifetime Outbound configured lifetime in seconds and
kilobytes
Statistics
InUserPackets Number of user packets received
InUserOctets Number of octets received from user packets
InAccPackets Number of encapsulated packets received
InAccOctets Number of octets received in encapsulated packets
InAuthErrors Number of authentication errors received
InReplyErrors Number of reply errors in received traffic
InPolicyErrors Number of policy errors in received traffic
InOtherRxErrors Number of packets received that have errors other
than those listed above
InDecryptErrors Number of decryption errors in received traffic
InPadErrors Number of packets received that had invalid values after
the packet was decrypted
OutUserPackets Number of user packets sent
OutUserOctets Number of octets sent in user packets
OutAccPackets Number of encapsulated packets sent
OutAccOctets Number of octets sent in encapsulated packets

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.0.x

Table of Contents