Table of Contents
Advertisement
show ip redistribute
show ip route
Use to display configured route redistribution policy.
Field descriptions
To Protocol into which routes are distributed
From Protocol from which routes are distributed
status Redistribution status
route map number Number of the route map
Example
host1#show ip redistribute
To ospf, From static is enabled with route map 4
To ospf, From connected is enabled with route map 3
See show ip redistribute.
Use to display the current state of the routing table, including routes that are not
used for forwarding.
You can display all routes, a specific route, all routes beginning with a specified
address, routes for a particular protocol (BGP, IS-IS, OSPF, or RIP), locally
connected routes, internal control routes, static routes, or summary counters for
the routing table.
Field descriptions
Prefix IP address prefix
Length Prefix length
Type Protocol type
Next Hop IP address of the next hop
Dist Distance metric for the route
Met Number of hops
Intf Interface type and interface specifier
Example 1
host1#show ip route
Protocol/Route type codes:
I1- ISIS level 1, I2- ISIS level2,
I- route type intra, IA- route type inter, E- route type external,
i- metric type internal, e- metric type external,
O- OSPF, E1- external type 1, E2- external type2,
N1- NSSA external type1, N2- NSSA external type2
Prefix/Length
Type
-------------
----
Chapter 1: Configuring Routing Policy
Next Hop
Dist/Met
--------
--------
Monitoring Routing Policy
Intf
------
55
Advertisement
Table of Contents
