Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 218

JUNOSe 11.0.x IP Services Configuration Guide
show subscribers
192
Monitoring IPSec Tunnel Profiles
inboundUserPacketsReceived = 88
inboundUserOctetsReceived
inboundAccPacketsReceived
inboundAccOctetsReceived
inboundAuthenticationErrors= 0
inboundReplayErrors = 0
inboundPolicyErrors = 0
inboundOtherRxErrors = 0
inboundDecryptErrors = 0
inboundPadErrors = 0
See show ipsec tunnel profile.
Use to display the active subscribers on the router.
Field descriptions
User Name Name of the subscriber
Type Type of subscriber: atm, ip, ipsec, ppp, tnl (tunnel), tst (test)
Addr | Endpt IP or IPv6 address and source of the address: l2tp, local, dhcp,
radius, user. For local, dhcp, radius, and user endpoints, the address is that
of the user. When the endpoint is l2tp, the address is that of the LNS.
Virtual Router Name of the virtual router context
Interface Interface specifier over which the subscriber is connected
Login Time Date, in YY/MM/DD format, and time the subscriber logged in
Circuit Id User's circuit ID value specified by PPPoE
Remote Id User's remote ID value specified by PPPoE
Example
host1#show subscribers
User Name
-----------------------
xcfgUser1@vpn1
User Name
-----------------------
xcfgUser1@vpn1
User Name
-----------------------
xcfgUser1@vpn1
User Name
-----------------------
xcfgUser1@vpn1
See show subscribers.
= 74880
= 88
= 79488
Subscriber List
----------------
Type Addr|Endpt
----- --------------------
ipsec 10.227.5.106/local
Interface
--------------------------------
FastEthernet 5/2.4
Login Time
------------------- -------------------
06/05/12 10:58:42 0.4.1.10.fe.25.3b.0
Remote Id
----------------
(800) 555-1212
Virtual
Router
------------
vpn1
Circuit Id