Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 233

show l2c
show l2c discovery-table
VDSL Adjustment factor for the VDSL DSL type
VDSL2 Adjustment factor for the VDSL2 DSL type
SDS Adjustment factor for the SDS DSL type
Example 1 Displays the adjustment factor for each DSL type
host1#show adjustment-factor
L2C QoS Adjustment Rates:
ADSL1: 45
ADSL2: 55
ADSL2+: 100
VDSL: 100
VDSL2: 55
SDS: 100
Example 2 Displays the adjustment factor for a specific DSL type verification
criteria
host1#show adjustment-factor vdsl2
VDSL2:11
See show adjustment-factor.
Use to display information about the ANCP configuration on the router.
Field descriptions
Current timeout Configured session timeout (in seconds)
Qos adaptive mode Whether QoS adaptive mode is enabled (true) or
disabled (false)
Wait-for-gsmp-syn Whether learning is enabled or disabled
gsmp-syn-timeout Configured TCP session timeout (in seconds)
Example
host1#show l2c
L2C:
Current session timeout: 25 seconds
Qos adaptive mode: false
Wait-for-gsmp-syn: Enable
gsmp-syn-timeout: 18 seconds
Use to display ANCP discovery table entries.
Use the optional delta keyword to display baseline statistics.
Field descriptions
Chapter 7: Configuring ANCP
207
Monitoring ANCP