Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 234

JUNOSe 11.0.x IP Services Configuration Guide
208
Monitoring ANCP
Neighbor Neighbor name
Access-Loop-Id Access loop identifier
Down/Upstream (kbps) Downstream and upstream rates, in Kbps
State State of the access loop, UP or DOWN
Actual-Data-Rate-Upstream Actual upstream data rate, in Kbps
Actual-Data-Rate-Downstream Actual downstream data rate, in Kbps
Attainable-Data-Rate-Upstream Attainable upstream data rate for this line,
in Kbps
Attainable-Data-Rate-Downstream Attainable downstream data rate for
this line, in Kbps
Line-State State of the access loop (SHOWTIME or IDLE)
Dsl-Type Type of DSL
Total Line Attributes Total number of line attributes reported
Example 1
host1# show l2c discovery-table brief
Neighbor
--------------- ------------------------------ ------------------- -----
ACCESSNODE_10 Accessnode_10 atm 2/2:0.0
ACCESSNODE_10 Accessnode_10 atm 2/32:0.0
ACCESSNODE_10 Accessnode_10 atm 2/33:0.0
ACCESSNODE_10 Accessnode_10 atm 2/34:0.0
Example 2 Topology discovery table for a particular end-user-id
host1#
show l2c discovery-table end-user-id "Accessnode_10 atm
2/3:0.0"Access-Loop-Id: Dslam_10 atm 2/3:0.0
Neighbor: ACCESSNODE_10
Actual-Data-Rate-Upstream: 1152(kbps)
Actual-Data-Rate-Downstream: 8064(kbps)
Attainable-Data-Rate-Upstream: 1176(kbps)
Attainable-Data-Rate-Downstream: 9376(kbps)
Line-State: 1(SHOWTIME)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 6
Example 3 Topology discovery table for a particular neighbor
host1# show l2c discovery-table neighbor "Accessnode_10"
Access-Loop-Id: Dslam_10 atm 10/5:0.0
Neighbor: DSLAM_10
Line-State: 2(IDLE)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 10/6:0.0
Neighbor: DSLAM_10
Line-State: 2(IDLE)
Access-Loop-Id Down/UpStream(kbps) State
8064/1184
8064/1184
8064/1184
8064/1184
DOWN
DOWN
UP
UP
DOWN
DOWN
UP