Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 300

JUNOSe 11.0.x IP Services Configuration Guide
show gre destination profile
274
Monitoring Dynamic IP Tunnels
Example
host1#show dvmrp tunnel summary
Administrative status
Operational status
See show dvmrp tunnel.
Use to display the configuration of GRE destination profiles.
Field descriptions
default gre destination profile Name of the modified default destination
profile on the system
gre destination profile Name of the GRE destination profiles configured on
the system
tunnel checksum Status of tunnel checksum configuration; enabled or
disabled
tunnel sequence-datagrams Status of tunnel sequence datagrams
configuration; enabled or disabled
tunnel mtu Value of the tunnel MTU
ipsec transport mode Status of IPSec transport mode configuration; enabled
or disabled
tunnel mdt Status of IPSec transport mode configuration; enabled or
disabled
profile Name of the profile assigned for upper IP interfaces
virtual router Name of the transport virtual router assigned to the destination
profile
tunnel destination subnet Value of the configured destination address
subnet
tunnel source Value of the configured source address
Example 1 Displays all GRE destination profiles configured on the system
host1#show gre destination profile
default gre destination profile global
gre destination profile boston1
gre destination profile boston2
3 gre destination profiles found
the default destination profile is present
enabled disabled
1 0
up down not-present
1 0 0