Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 338

JUNOSe 11.0.x IP Services Configuration Guide
show ipsec transport interface summary
show ipsec transport profile
312
Monitoring DVMRP/IPSec, GRE/IPSec, and L2TP/IPSec Tunnels
OutPolicyErrors
OutOtherTxErrors
See show ipsec transport interface.
Use to display a summary of existing IPSec transport connections by application
and state.
Field descriptions
up Number of IPSec transport interfaces that are currently up
down Number of IPSec transport interfaces that are currently down
upper-bound Number of IPSec transport interfaces that are currently bound
to the upper layer
Example
host1:vr11#show ipsec transport interface summary
Operational status
See show ipsec transport interface.
Use to display the configuration of an IPSec transport profile.
Field descriptions
IPSec transport profile Name of the profile
Virtual router Virtual router on which this profile is configured
Peer address Remote endpoint address
Application Type(s) of application that this profile is protecting
Lifetime range in seconds Lifetime range in seconds configured for the
profile
Lifetime range in kilobytes Lifetime range in kilobytes configured for
the profile
TransformSet Transform set(s) configured for the profile
Pfs group PFS group configured for the profile; 0 (zero) means that
PFS is not configured for the profile
Local ip address Local endpoint address
Example 1
host1:vr11#show ipsec transport profile
IPSEC transport profile goi1
0
0
up down upper-bound
2 0 2