Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 38

JUNOSe 11.0.x IP Services Configuration Guide
match ipv6 route-source
match level
match metric
match metric-type
12
Route Maps
host1(config-route-map)#match ipv6 next-hop prefix-list next1
Use the no version to delete all next-hop match clauses from a route map unless
you specify a prefix list, in which case only that prefix list match is removed
from the route map.
See match ipv6 next-hop.
Use to match any routes that are advertised from addresses contained in the
specified prefix list.
Example
host1(config-route-map)#match ipv6 route-source prefix-list source
Use the no version to delete all route-source match clauses from a route map
unless you specify a prefix list, in which case only that prefix list match is
removed from the route map.
See match ipv6 route-source.
Use to match routes for the specified level.
Example
host1(config-route-map)#match level level-1
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
See match level.
Use to match a route for the specified metric value.
Example
host1(config-route-map)#match metric 10
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
See match metric.
Use to match a route for the specified metric type.
Example
host1(config-route-map)#match metric-type external