Displaying Inside And Outside Rule Settings - Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual

Displaying Inside and Outside Rule Settings

The show ip nat inside rule and show ip nat outside rule commands display access
list and pool usage for all dynamic translation rules configured for the virtual router.
If you do not specify an access list, the output displays address pool associations for
each of the access lists for either inside or outside translation rules in the virtual
router. Specifying an access list filters the output to display only the address pool
associated with the specified list.
show ip nat inside rule
show ip nat outside rule
range: 4.4.4.1 to 4.4.4.32
pool: pool2 netmask: 255.255.255.0
range: 1.1.1.1 to 1.1.1.24
range: 2.2.2.1 to 2.2.2.55
Example 2
host1#show ip nat pool pool1
pool: pool1 netmask: 255.255.255.0
range: 3.3.3.1 to 3.3.3.255
range: 4.4.4.1 to 4.4.4.32
See show ip nat pool.
Use to display NAT access list and pool usage information for inside source
translation rules.
Field descriptions
access list name Name of the access list
pool name Name of the address pool
rule type Type of rule assigned
Example
host1#show ip nat inside rule
access list name: list1
access list name: list2
access list name: list3 pool name: poolC rule type: inside source overload
See show ip nat inside rule.
Use to display NAT access list and pool usage information for outside source
translation rules.
Field descriptions
access list name Name of the access list
pool name Name of the address pool
prefix length: 24
prefix length: 24
pool name: poolA rule type: inside source
pool name: poolB rule type: inside source
Chapter 2: Configuring NAT
93
Monitoring NAT