Table of Contents
Advertisement
show l2c label
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 10/7:0.0
Neighbor: DSLAM_10
Line-State: 2(IDLE)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 2/0:0.0
Neighbor: DSLAM_10
Actual-Data-Rate-Upstream: 1184(kbps)
Actual-Data-Rate-Downstream: 8064(kbps)
Attainable-Data-Rate-Upstream: 1184(kbps)
Attainable-Data-Rate-Downstream: 9408(kbps)
Line-State: 1(SHOWTIME)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 6
See show l2c discovery-table.
Use to display information about known ANCP labels on the router.
Use the neighbor-input keyword to display labels for input ports.
Use the neighbor-output keyword to display labels for output ports.
Use the brief keyword to show limited information.
Field descriptions
Interface Interface on which ANCP is configured
End-User-Id Output label associated with the interface
Neighbor Neighbor associated with the interface
Max-Branches Maximum number of branches to which the ANCP interface
can subscribe
Peer-Attach-Id Input label associated with the interface
Example 1
host1# show l2c label
Interface: ATM2/0.300
End-User-Id: Accessnode_10 atm2/2:0.0
Neighbor: accessnode _1002
Max-Branches: 5
Interface: ATM2/0.301
End-User-Id: Accessnode_10 atm2/3:0.0
Neighbor: accessnode_1002
Max-Branches: 5
Interface: ATM2/0.302
End-User-Id: Accessnode_10 atm2/4:0.0
Neighbor: accessnode _1002
Max-Branches: 5
Interface: ATM2/0.303
End-User-Id: Accessnode_10 atm2/5:0.0
Neighbor: accessnode _1004
Max-Branches: 5
Chapter 7: Configuring ANCP
DOWN
UP
Monitoring ANCP
209
Advertisement
Table of Contents
