Table of Contents
Advertisement
show dvmrp tunnel
host1#show dvmrp destination profile
default dvmrp destination profile global
dvmrp destination profile kanata1
dvmrp destination profile kanata2
3 dvmrp destination profiles found
the default destination profile is present
Example 2 Displays a specific destination profile
host1#show dvmrp destination profile kanata1
dvmrp destination profile kanata1
tunnel mtu 10240
ipsec transport mode disabled
tunnel mdt disabled
profile disabled
virtual router vr1
tunnel destination subnet 10.0.0.0 255.0.0.0
tunnel source 1.1.1.1
tunnel source 1.1.1.2
tunnel source 1.1.1.3
See show dvmrp destination profile.
Use to display information about DVMRP tunnels.
To view detailed information about tunnels, specify the detail keyword.
To view the number of tunnels in a specific state, specify the state keyword and
the state of the tunnel (disabled, down, enabled, lower-down, not-present, up).
To view the state of a specific tunnel, specify a tunnel name.
To view the number of tunnels associated with that IP address, specify an IP
address.
To view the number of tunnels associated with an IP address on the virtual router,
specify an IP address with the virtual-router keyword and the name of the virtual
router.
Field descriptions
DVMRP tunnel Name and state of the dynamic DVMRP tunnel:
Up Tunnel is operational
Down Tunnel is not operational
not-present Tunnel is not operational, because the hardware (such as
a line module) supporting the tunnel is inaccessible
Application Name of the application that created the tunnel
Tunnel mtu Value of the maximum transmission unit for the tunnel
Tunnel source address IP address of the source of the tunnel
Tunnel destination address IP address of the destination of the tunnel
Chapter 10: Configuring Dynamic IP Tunnels
Monitoring Dynamic IP Tunnels
271
Advertisement
Table of Contents
