Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 84

For e series broadband services routers - ip services configuration
Table of Contents

Advertisement

JUNOSe 11.0.x IP Services Configuration Guide
show ip traffic
58
Monitoring Routing Policy
Prefix IP address prefix
Length Prefix length
Next Hop IP address of the next hop
Met Number of hops
Dist Administrative distance or weight assigned to the route
Tag Tag value assigned to the route
Intf Interface type and interface specifier
Example
host1#show ip static
Prefix/Length
Next Hop:
10.2.0.0/24
192.168.1.1
10.2.1.0/24
192.168.1.1
172.31.1.48/32
172.18.2.2
See show ip static.
Use to display statistics about IP traffic.
Field descriptions
IP Statistics Rcvd:
Router Id Router ID number
total Number of frames received
local destination Frames with this router as their destination
hdr errors Number of packets received that contain header errors
addr errors Number of packets received that contain addressing errors
unkn proto Number of packets received that contain unknown protocols
discards Number of discarded packets
IP Statistics Frags:
reassembled Number of reassembled packets
reasm timed out Number of reassembled packets that timed out
reasm req Number of requests for reassembly
reasm fails Number of reassembly failures
frag ok Number of fragmented packets reassembled successfully
frag fail Number of fragmented packets reassembled unsuccessfully
frag creates Number of packets created by fragmentation
Met: Dist:
Tag:
Intf:
1
1
0
ethernet6/0
1
1
1
ethernet6/0
1
1
0
atm5/1.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.0.x

Table of Contents