Table of Contents
Advertisement
show dvmrp tunnel summary
Tunnel source address is '1.1.1.1'
Tunnel destination address is '2.2.2.2'
Tunnel transport virtual router is vr1
Tunnel mdt is disabled
Tunnel up/down trap is enabled
Tunnel-server location is 4/0
Tunnel administrative state is Up
Statistics
packets
Data rx
0
Data tx
0
1 DVMRP tunnel found
1 tunnel was created dynamically
Example 3 Displays the detail of a dynamically created DVMRP tunnel for the
Mobile IP application
host1:vr12#show dvmrp tunnel detail mobileIp-dynamic-1
DVMRP tunnel mobileIp-dynamic-1 is Up
tunnel is dynamic
Application is Mobile-IP
Tunnel operational configuration
Tunnel mtu is '5000'
Tunnel source address is '6.6.6.6'
Tunnel destination address is '3.3.3.3'
Tunnel transport virtual router is vr1
Tunnel mdt is disabled
Tunnel checksum option is disabled
Tunnel sequence number option is disabled
Tunnel key is disabled
Tunnel up/down trap is enabled
Tunnel-server location is 6/0
Tunnel administrative state is Up
Statistics
packets
Data rx
0
Data tx
0
See show dvmrp tunnel.
Use to display a summary of information about DVMRP tunnels.
Field descriptions
Administrative status
enabled Tunnel is available for use
disabled Tunnel is not available for use
Operational status
up Tunnel is operational
down Tunnel is not operational
not-present Tunnel is not operational, because the hardware (such as
a line module) supporting the tunnel is inaccessible
Chapter 10: Configuring Dynamic IP Tunnels
octets
discards
0
0
0
0
octets
discards
0
0
0
0
Monitoring Dynamic IP Tunnels
errors
0
0
errors
0
0
273
Advertisement
Table of Contents
