Table of Contents
Advertisement
show license nat
Displaying Translation Statistics
show ip nat statistics
Copyright © 2010, Juniper Networks, Inc.
Use to display the NAT license key configured on the router.
Example
host1#show license nat
Nat license is nat_license
See show license.
The show ip nat statistics command displays internal statistics that apply to NAT
operation.
Use to display internal NAT statistics.
Field descriptions
Last dynamic allocation failure—Completion level of any dynamic allocation failures;
the number of times the router attempted dynamic allocation but reached the
dynamic allocation entry limit
Current static translation entries
Inside Source Simple—Number of inside source simple static translations
Outside Source Simple—Number of outside source simple static translations
Inside Source Extended—Number of inside source extended static translations
Outside Source Extended—Number of outside source extended static translations
Dynamic Translation Type—Type of dynamic translation (inside source simple,
outside source simple, inside source extended )
Current—Current number of dynamic translations of the associated translation type
Peak—Peak number of dynamic translations of the associated translation type
Accumulated—Accumulated number of dynamic translations of the associated type;
this value reflects the accumulation of dynamic translations since the last router
reboot operation
Failed—Total number of installation attempts that failed for an associated translation
type
Forwarding statistics for packets received on inside or outside interfaces
forwarded directly—Number of packets forwarded directly (that is, without the
need of translation)
forwarded through translator—Number of packets forwarded through the NAT
translator
Chapter 2: Configuring NAT
85
Advertisement
Table of Contents
