Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 268

JUNOSe 11.0.x IP Services Configuration Guide
show ipsec ike-configuration
show ike configuration
NOTE: The show ike configuration command has been replaced by the show ipsec
ike-configuration command and may be removed completely in a future release.
show ipsec key mypubkey rsa
242
Monitoring Digital Certificates and Public Keys
Organization Name of the organization used in the Subject Name field of
certificates
Country Country used to generate certificates
Example
host1#show ipsec identity
Ike identity:
Domain Name :myerx.kanata.junipernetworks.com
Common Name :jim
Organization:junipernetworks
Country :ca
See show ipsec identity.
See show ike identity.
Use to display a summary of the IKE configuration.
Field descriptions
Ike identity Information from your IKE identify configuration that the router
uses to generate certificate requests
CRL Check Setting of the CRL check: optional, required, ignored
Example
host1#show ipsec ike-configuration
Ike configuration:
Ike identity:
Domain Name :treverxsys2.juniper.net
Common Name :Sys2 ERX
Organization:Juniper Networks
Country :CA
CRL Check:optional
See show ipsec ike-configuration.
See show ike configuration.
Use to display the 1024-bit or 2048-bit RSA public key configured on the router.
The public key is generated as part of a public/private key pair used to perform
RSA authentication during ISAKMP/IKE SA negotiations.