Table of Contents
Advertisement
show l2tp destination profile
IPSEC transport profile goi2
2 Ipsec transport profiles found
Example 2
host1:vr11#show ipsec transport profile goi1
IPSEC transport profile goi1
Virtual router vr00
Peer address 10.255.0.62
Application gre,dvmrp
Lifetime range in seconds 900 900
Lifetime range in kilobytes 102400 4294967294
TransformSet transport-esp-3des-sha1
Pfs group 0
Local ip address : 10.255.0.61
See show ipsec transport profile.
Use to display configuration information for an L2TP destination profile and its
associated L2TP host profiles.
If single-shot tunnels are configured for a particular host profile, the command
displays this information as an attribute of the profile for that remote host.
Field descriptions
Destination profile attributes:
Transport Method used to transfer traffic
Virtual router Name of the virtual router
Peer address IP address of the LAC
Destination profile maximum sessions Maximum number of sessions
allowed for the destination profile
Destination profile current session count Number of current sessions
for the destination profile
Host profile attributes:
Remote host is Name of the remote host
Tunnel password is Password for the tunnel
Interface profile is Name of the host profile
Local host name is Name of the local host
Ipsec transport is Status of the IPSec transport connection: enabled or
disabled
Disconnect-cause avp is Status of the disconnect cause AVP generation:
enabled or disabled
Monitoring DVMRP/IPSec, GRE/IPSec, and L2TP/IPSec Tunnels
Chapter 12: Securing L2TP and IP Tunnels with IPSec
313
Advertisement
Table of Contents
