Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual page 77

show ip as-path-access-list
show ip community-list
Use to display information about access lists.
The displayed information includes the instances of each access list.
Use the detail keyword to display the automatically assigned element ID for
each access list entry. Only rules that you explicitly create have element IDs.
Example 1
host1#show access-list
IP Access List 1:
permit ip host 172.31.192.217 any
permit ip 12.40.0.0 0.0.0.3 any
deny ip any any
IP Access List 2:
permit ip 172.19.0.0 0.0.255.255 any
deny ip 0.0.0.0 255.255.255.255 any
IP Access List 10:
permit ip any any
IP Access List 11:
deny ip any any
Example 2
host1#show access-list detail
IP Access List 1:
1: permit ip host 172.31.192.217 any
2: permit ip 12.40.0.0 0.0.0.3 any
deny ip any any
See show access-list.
See show ipv6 access-list.
Use to display information about AS-path access lists.
Example
host1#show ip as-path-access-list
AS Path Access List 1:
permit .*
AS Path Access List 2:
deny .*
AS Path Access List 3:
permit _109_
deny .*
AS Path Access List 4:
permit _109$
deny .*
AS Path Access List 10:
deny _109$
permit ^108_
deny .*
See show ip as-path-access-list.
Chapter 1: Configuring Routing Policy
Monitoring Routing Policy
51