User Group Name; User Group Rename - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

Default 1
Format
user group <1-10>
Mode Captive Portal Configuration mode
no user group
Use this command to delete a user group. The default user group (1) cannot be deleted.
Format
user group <1-10>
Mode Captive Portal Configuration mode

user group name

Use this command to configure a group name. <1-10> is the user group ID. The name can be a
string up to 32 characters.
Format
user group <1-10>
Mode Captive Portal Configuration mode

user group rename

Use this command to change a group's ID to a different group ID.
Format
user group group-id
Mode Captive Portal Configuration mode
Captive Portal Commands
Managed Switch CLI Manual, Release 8.0
name name
rename new-group-id
v1.0, July 2009
9-32