Speed All; Show Port - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

speed
This command sets the speed and duplex setting for the interface.
Format
speed {<100 | 10> <half-duplex | full-duplex>}
Mode Interface Config
Acceptable
Definition
Values
100h 100BASE-T half duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex
10f 10BASE-T full duplex

speed all

This command sets the speed and duplex setting for all interfaces.
Format
speed all {<100 | 10> <half-duplex | full-duplex>}
Mode Global Config
Acceptable
Definition
Values
100h 100BASE-T half duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex
10f 10BASE-T full duplex

show port

This command displays port information.
Format
show port {<unit/slot/port> | all}
Mode Privileged EXEC
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-7