NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual page 326

Managed switches cli manual, software version 8.0
Hide thumbs Also See for GSM7224v2 - Layer 2 Managed Gigabit Switch:
Table of Contents

Advertisement

The display parameters, when the argument is <unit/slot/port>, are as follows:
Parameters
Definition
Packets
The total number of packets (including broadcast packets and multicast packets) received
Received
by the processor.
Without Error
Packets
The number of inbound packets that contained errors preventing them from being
Received With
deliverable to a higher-layer protocol.
Error
Broadcast
The total number of packets received that were directed to the broadcast address. Note
Packets
that this does not include multicast packets.
Received
Packets
The total number of packets transmitted out of the interface.
Transmitted
Without Error
Transmit
The number of outbound packets that could not be transmitted because of errors.
Packets Errors
Collisions
The best estimate of the total number of collisions on this Ethernet segment.
Frames
Time Since
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port
Counters Last
were last cleared.
Cleared
The display parameters, when the argument is "switchport" are as follows:
Term
Definition
Packets
The total number of packets (including broadcast packets and multicast packets) received
Received
by the processor.
Without Error
Broadcast
The total number of packets received that were directed to the broadcast address. Note
Packets
that this does not include multicast packets.
Received
Packets
The number of inbound packets that contained errors preventing them from being
Received With
deliverable to a higher-layer protocol.
Error
Packets
The total number of packets transmitted out of the interface.
Transmitted
Without Error
Broadcast
The total number of packets that higher-level protocols requested to be transmitted to the
Packets
Broadcast address, including those that were discarded or not sent.
Transmitted
Transmit Packet
The number of outbound packets that could not be transmitted because of errors.
Errors
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
6-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents