Diffserv Show Commands - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

Format
service-policy in <policymapname>
Modes • Global Config
• Interface Config
Note: Each interface can have one policy attached.
no service-policy
This command detaches a policy from an interface in the inbound direction. The <policyname>
parameter is the name of an existing DiffServ policy.
Note: This command causes a service to remove its reference to the policy. This
command effectively disables DiffServ on an interface in the inbound direction.
There is no separate interface administrative 'mode' command for DiffServ.
Format
no service-policy in <policymapname>
Modes • Global Config
• Interface Config

DiffServ Show Commands

Use the DiffServ show commands to display configuration and status information for classes,
policies, and services. You can display DiffServ information in summary or detailed formats. The
status information is only shown when the DiffServ administrative mode is enabled.
show class-map
This command displays all configuration information for the specified class. The <class-
name> is the name of an existing DiffServ class.
Format
show class-map <class-name>
Modes • Privileged EXEC
• User EXEC
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
5-26