Isdp Enable; Clear Isdp Counters; Clear Isdp Table; Show Isdp - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

isdp enable

This command enables ISDP on the interface.
Default Enabled
Format
isdp enable
Mode Interface Config
no isdp enable
This command disables ISDP on the interface.
Format
no isdp enable
Mode Interface Config

clear isdp counters

This command clears ISDP counters.
Format
clear isdp counters
Mode Privileged EXEC

clear isdp table

This command clears entries in the ISDP table.
Format
clear isdp table
Mode Privileged EXEC

show isdp

This command displays global ISDP settings.
Format
show isdp
Mode Privileged EXEC
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-195