Show Tacacs - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

priority
Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The <priority> parameter specifies the
priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
Default 0
Format
priority <priority>
Mode TACACS Config
timeout
Use the timeout command in TACACS Configuration mode to specify the timeout value in
seconds. If no timeout value is specified, the global value is used. The <timeout> parameter has
a range of 1-30 and is the timeout value in seconds.
Format
timeout <timeout>
Mode TACACS Config

show tacacs

Use the show tacacs command to display the configuration and statistics of a TACACS+
server.
Format
show tacacs [<ip-address|hostname>]
Mode Privileged EXEC
Term
Host Address
Port
TimeOut
Priority
Management Commands
Definition
The IP address or hostname of the configured TACACS+ server.
The configured TACACS+ server port number.
The timeout in seconds for establishing a TCP connection.
The preference order in which TACACS+ servers are contacted. If a server
connection fails, the next highest priority server is contacted.
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
7-70