NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual page 214

Term Definition
Sub Type Shows the type of location information.
Location Shows the location information as a string for a given type of location id
Information
Device Type Shows the remote device's PoE device type connected to this port.
Available Shows the romote port's PSE power value in tenths of a watt.
Source Shows the remote port's PSE power source.
Priority Shows the remote port's PSE priority.
Required Shows the remote port's PD power requirement.
Source Shows the remote port's PD power source.
Priority Shows the remote port's PD power priority.
Example: The following shows example CLI display output for the command.
(Switch) #show lldp med remote-device detail 1/0/8
LLDP MED Remote Device Detail
Local Interface: 1/0/8
Remote Identifier: 18
Capabilities
MED Capabilities Supported: capabilities, networkpolicy, location, extendedpse
MED Capabilities Enabled: capabilities, networkpolicy
Device Class: Endpoint Class I
Network Policies
Media Policy Application Type : voice
Vlan ID: 10
Priority: 5
DSCP: 1
Unknown: False
Tagged: True
Media Policy Application Type : streamingvideo
Vlan ID: 20
Priority: 1
DSCP: 2
Unknown: False
Tagged: True
Inventory
Hardware Rev: xxx xxx xxx
Firmware Rev: xxx xxx xxx
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-178