Ce-Series Ethernet Card Performance Monitoring Parameters - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Chapter 15 Performance Monitoring
Table 15-20
Parameter
rprClientStatsOutBcastFrames
rprErrorStatsBadParityFrames
rprErrorStatsBadHecFrames
rprErrorStatsTtlExpFrames
rprErrorStatsTooLongFrames
rprErrorStatsTooShortFrames
rprErrorStatsBadFcsFrames
rprErrorStatsSelfSrcUcastFram
es
rprErrorStatsPmdAbortFrames The number of received (PHY to MAC) frames that were aborted by
rprErrorStatsBadAddrFrames
rprErrorStatsContainedFrames The number of received (PHY to MAC) frames that were removed
rprErrorStatsScffErrors
gpfStatsCSFRaised
gfpStatsLFDRaised
rprPortCounterError

15.6.4 CE-Series Ethernet Card Performance Monitoring Parameters

CTC provides Ethernet performance information, including line-level parameters, port bandwidth
consumption, and historical Ethernet statistics. The CE-Series card Ethernet performance information is
divided into Ether Ports and POS Ports tabbed windows within the card view Performance tab window.
78-18106-01
ML-Series RPR Span Parameters for 802.17 MIB (continued)
Meaning
Number of client to MAC broadcast frames. This is used only when
deriving the multicast and broadcast packet counters for the interface
MIB.
Number of received (PHY to MAC) frames parity value not matching
the expected parity value
The number of received (PHY to MAC) frames with HEC error
The number of received (PHY to MAC) frames that were dropped due
to zero Time To Live (TTL).
The number of received (PHY to MAC) frames that exceed the
maximum permitted frame size.
The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size.
The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.
The number of received (PHY to MAC) unicast frames that were
transmitted by the station itself. That is, the source MAC is equal to
the interface MAC.
the PMD.
The number of received (PHY to MAC) frames with invalid SA
value.
due to context containment.
The number of received (PHY to MAC) errored SCFF, with bad
parity, bad FCS, or both.
The number of total received client management frames.
The number of Core HEC CRC Multiple Bit Errors.
This count is only for cHEC multiple bit error when in frame.
Note
It is a count of when the state machine goes out of frame.
Packets dropped internally by the network processor.
15.6.4 CE-Series Ethernet Card Performance Monitoring Parameters
Cisco ONS 15454 Reference Manual, R8.5
15-43