A.3 General Card Specifications; A.3.1 Power - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Appendix A Hardware Specifications
Table A-2
SFP/XFP Product ID
ONS-SI-622-SR-MM=
ONS-SC-Z3-1470=
through
ONS-SC-Z3-1610=
ONS-SE-Z1=
ONS-SI-2G-S1
ONS-SE-155-1470
through
ONS-SE-155-1610
ONS-SI-GE-SX
ONS-SI-GE-LX
ONS-SI-GE-ZX
ONS-SI-100-FX
ONS-SI-100-LX10
ONS-SE-ZE-EL
ONS-SE-100-BX10U
ONS-SE-100-BX10D
1. Based on any valid 8B/10B code pattern measured at, or extrapolated to, 10E-15 BER measured at center of eye
2. Minimum Stressed Sensitivity (10-12): -12.5(62.5um) and -13.5(50um) dBm
3. Minimum Stressed Sensitivity (10
4. ONS-SC-2G-28.7, ONS-SC-2G-33.4, ONS-SC-2G-41.3, ONS-SC-2G-49.3, and ONS-SC-2G-57.3 are supported from

A.3 General Card Specifications

This section provides power specifications and temperature ranges for all ONS 15454 cards.

A.3.1 Power

Table A-3
78-18106-01
SFP , XFP , and GBIC Specifications (continued)
Interface
OC-12, STM-4
OC48/STM16/GE
OC-3/STM1
OC-12/STM-4
OC-48/STM-16
Fibre Channel
(1 and 2 Gbps)
GE
OC-48/STM-16
OC-3/STM-1
GE
GE
GE
FE
FE
E, FE, or GE
FE
FE
Release 8.5 and later.
provides power consumption information for the ONS 15454 cards.
Transmitter Output
Power Min/Max (dBm)
-20 to -14 (50
micrometer)
-24 to -14 (62.5
micrometer)
0 to +5
–5 to 0
–10 to –3
0 to +5
-9.5 to -3
-9.5 to +3
+5 to 0
—
—
—
-14 to -8
-14 to -8
–12
): -14.4 dBm
A.3 General Card Specifications
Receiver Input Power
Min/Max (dBm)
-26 to -14
–7 (min)
–10 to –23 (OC-3)
0 to –23 (OC-12)
–18 to 0 (OC-48)
0 to –21 (Fibre Channel)
0 to –22 (GE)
–3 min
–7 to 0
0 to –17
-3 to -17
0 to –23
—
—
—
-8 to -28.2
-8 to -28.2
Cisco ONS 15454 Reference Manual, R8.5
A-7