Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual page 321

Reference manual
Table of Contents

Advertisement

Cisco Transport Controller Operation
This chapter describes Cisco Transport Controller (CTC), the software interface for the
Cisco ONS 15454. For CTC set up and login information, refer to the Cisco ONS 15454 Procedure
Guide.
Chapter topics include:
8.1 CTC Software Delivery Methods
ONS 15454 provisioning and administration is performed using the CTC software. CTC is a Java
application that is installed in two locations; CTC is stored on the Advanced Timing, Communications,
and Control (TCC2) card or the Advanced Timing, Communications, and Control Plus (TCC2P) card,
and it is downloaded to your workstation the first time you log into the ONS 15454 with a new software
release.
8.1.1 CTC Software Installed on the TCC2/TCC2P Card
CTC software is preloaded on the ONS 15454 TCC2/TCC2P cards; therefore, you do not need to install
software on the TCC2/TCC2P cards. When a new CTC software version is released, use the
release-specific software upgrade document to upgrade the ONS 15454 software on the TCC2/TCC2P
cards.
78-18106-01
8.1 CTC Software Delivery Methods, page 8-1
8.2 CTC Installation Overview, page 8-4
8.3 PC and UNIX Workstation Requirements, page 8-4
8.4 ONS 15454 Connection, page 8-7
8.5 CTC Login, page 8-7
8.6 CTC Window, page 8-8
8.7 Using the CTC Launcher Application to Manage Multiple ONS Nodes, page 8-18
8.8 TCC2/TCC2P Card Reset, page 8-21
8.9 TCC2/TCC2P Card Database, page 8-21
8.10 Software Revert, page 8-22
8
C H A P T E R
Cisco ONS 15454 Reference Manual, R8.5
8-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15454

Table of Contents