Oc12 Lr/Stm4 Lh 1310 Card-Level Indicators; Oc12 Lr/Stm4 Lh 1310 Port-Level Indicators; Oc12 Lr/Stm4 Lh 1550 Card; Table - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Reference manual
Table of Contents

Advertisement

Chapter 4
Optical Cards

4.5.1 OC12 LR/STM4 LH 1310 Card-Level Indicators

Table 4-6

Table 4-6
Card-Level Indicators
Red FAIL LED
Green/Amber ACT
LED
Amber SF LED

4.5.2 OC12 LR/STM4 LH 1310 Port-Level Indicators

You can find the status of the OC12 LR/STM4 LH 1310 card port by using the LCD screen on the
ONS 15454 fan-tray assembly. Use the LCD to quickly view the status of any port or card slot; the screen
displays the number and severity of alarms for a given port or slot.

4.6 OC12 LR/STM4 LH 1550 Card

For hardware specifications, see the
Note
page
The OC12 LR/STM4 LH 1550 card provides one long-range SONET/SDH OC-12 port compliant with
ITU-T G.707, ITU-T G.957, and Telcordia GR-253-CORE. The port operates at 622.08 Mbps over a
single-mode fiber span. The card supports VT, nonconcatenated (STS-1), or concatenated (STS-3c,
STS-6c, or STS-12c) payloads.
diagram of the card.
The laser is on when the optical card is booted. The port does not have to be in service for the laser
Warning
to be on. Statement 293
Note
The OC12 LR 1550 and OC12 LR/STM4 LH 1550 cards are functionally the same.
78-18106-01
describes the three card-level LEDs on the OC12 LR/STM4 LH 1310 card.
OC12 LR/STM4 LH 1310 Card-Level Indicators
Description
The red FAIL LED indicates that the card's processor is not ready. Replace
the card if the red FAIL LED persists.
The green ACT LED indicates that the card is operational and is carrying
traffic or is traffic-ready. The amber ACT LED indicates that the card is part
of an active ring switch (BLSR).
The amber SF LED indicates a signal failure or condition such as LOS, LOF,
AIS-L, or high BERs on the card's port. The amber SF LED is also on if the
transmit and receive fibers are incorrectly connected. If the fibers are
properly connected, the light turns off.
A-32. See
Table 4-2 on page 4-5
"A.6.5 OC12 LR/STM4 LH 1550 Card Specifications" section on
for optical card compatibility.
Figure 4-5
shows the OC12 LR/STM4 LH 1550 faceplate and a block
Cisco ONS 15454 Reference Manual, R8.5
4.5.1 OC12 LR/STM4 LH 1310 Card-Level Indicators
4-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15454

Table of Contents