Row Deletion In Historycontrol Table; Get Requests And Getnext Requests; Ethernet History Rmon Group; Bit Etherhistoryhighcapacitytable - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Reference manual
Table of Contents

Advertisement

16.10.5 Ethernet History RMON Group

To create a SetRequest PDU for the historyControlTable, the following values are required:
The historyControlBucketsRequested OID value is ignored because the number of buckets allowed for
each sampling period, based upon the historyControlInterval value, is already fixed as listed in
Table
The historyControlInterval value cannot be changed from the four allowed choices. If you use another
value, the SNMP agent selects the closest smaller time period from the set buckets. For example, if the
set request specifies a 25-minute interval, this falls between the 15-minute (32 bucket) variable and the
60-minute (24 bucket) variable. The SNMP agent automatically selects the lower, closer value, which is
15 minutes, so it allows 32 buckets.
If the SetRequest PDU is valid, a historyControlTable row is created. If the row already exists, or if the
SetRequest PDU values do not make sense or are insufficient, the SNMP agent does not create the row
and returns an error code.

16.10.4.3 Get Requests and GetNext Requests

These PDUs are not restricted.

16.10.4.4 Row Deletion in historyControl Table

To delete a row from the table, the SetRequest PDU should contain a historyControlStatus value of 4
(invalid). A deleted row can be recreated.
16.10.5 Ethernet History RMON Group
The ONS 15454 implements the etherHistoryTable as defined in RFC 2819. The group is created within
the bounds of the historyControlTable and does not deviate from the RFC in its design.

16.10.5.1 64-Bit etherHistoryHighCapacityTable

64-bit Ethernet history for the HC-RMON-MIB is implemented in the etherHistoryHighCapacityTable,
which is an extension of the etherHistoryTable. The etherHistoryHighCapacityTable adds four columns
for 64-bit performance monitoring data. These two tables have a one-to-one relationship. Adding or
deleting a row in one table will effect the same change in the other.

16.10.6 Alarm RMON Group

The Alarm group consists of the alarmTable, which periodically compares sampled values with
configured thresholds and raises an event if a threshold is crossed. This group requires the
implementation of the event group, which follows this section.
Cisco ONS 15454 Reference Manual, R8.5
16-20
The historyControlDataSource and its desired value
The historyControlBucketsRequested and it desired value
The historyControlInterval and its desired value
The historyControlOwner and its desired value
The historyControlStatus with a value of createRequest (2)
16-9.
Chapter 16
SNMP
78-18106-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15454

Table of Contents