Ml100X-8 Card-Level Indicators; Ml100X-8 Faceplate And Block Diagram; Table - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Chapter 5 Ethernet Cards
Figure 5-7
ML 100X-
8
FAIL
ACT
The card features two virtual packet over SONET (POS) ports with a maximum combined bandwidth of
STS-48. The ports function in a manner similar to OC-N card ports, and each port carries an STS circuit
with a size of STS-1, STS-3c, STS-6c, STS-9c, STS-12c, or STS-24c. To configure an ML-Series card
SONET STS circuit, refer to the "Create Circuits and VT Tunnels" chapter of the Cisco ONS 15454
Procedure Guide.
The ML-Series POS ports supports virtual concatenation (VCAT) of SONET circuits and a software link
capacity adjustment scheme (SW-LCAS). The ML-Series cards support a maximum of two VCAT
groups with each group corresponding to one of the POS ports. Each VCAT group must be provisioned
with two circuit members. An ML-Series card supports STS-1c-2v, STS-3c-2v and STS-12c-2v. To
configure an ML-Series-card SONET VCAT circuit, refer to the "Create Circuits and VT Tunnels"
chapter of the Cisco ONS 15454 Procedure Guide.

5.8.1 ML100X-8 Card-Level Indicators

The ML100X-8 card supports two card-level LED indicators.
indicators.
78-18106-01

ML100X-8 Faceplate and Block Diagram

Tx
0
Rx
Tx
1 SFP
Rx
SFP
Tx
2
Rx SFP
Tx
SFP
3
Rx
SFP
SFP
Tx
4
Rx
SFP
Tx
SFP
5
Rx
Tx
6
Rx
Tx
7
Rx
Packet
Memory
Network
PHY Processor
Unit
TCAM
Cisco ONS 15454 Reference Manual, R8.5
5.8.1 ML100X-8 Card-Level Indicators
B
a
c
k
SONET
p
Framer
l
a
n
e

Table 5-15

describes the card-level
5-19