Roll Status; Table 11-20 Roll Statuses - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Reference manual
Table of Contents

Advertisement

11.19.2 Roll Status

11.19.2 Roll Status
Table 11-20
Table 11-20
State
ROLL_PENDING
ROLL_COMPLETED
ROLL_CANCELLED
Cisco ONS 15454 Reference Manual, R8.5
11-42
Roll Path—The fixed point of the roll object.
Roll From Circuit—The circuit that has connections that will no longer be used when the process is
complete.
Roll From Path— The old path that is being rerouted.
Roll To Path—The new path where the Roll From Path is rerouted.
Complete—Completes a manual roll after a valid signal is received. You can do this when a manual
roll is in a ROLL_PENDING status and you have not yet completed the roll or have not cancelled
its sibling roll. You cannot cancel the roll after you complete the roll.
Force Valid Signal—Forces a roll onto the Roll To Circuit destination without a valid signal.
Note
If you choose Force Valid Signal, traffic on the circuit that is involved in the roll will be
dropped when the roll is completed.
Finish—Completes the circuit processing of both manual and automatic rolls and changes the circuit
status from ROLL_PENDING to DISCOVERED. After a roll, the Finish button also removes any
cross-connects that are no longer used from the Roll From Circuit field. The roll process ends when
you finish the roll.
Cancel—Cancels the roll process.
When the roll mode is Manual, cancelling a roll is only allowed before you click the
Note
Complete button. When the roll mode is Auto, cancelling a roll is only allowed before a good
signal is detected by the node or before clicking the Force Valid Signal button.
lists the roll statuses.
Roll Statuses
Description
Roll is awaiting completion or cancellation.
Roll is complete. Click the Finish button.
Roll has been canceled.
Chapter 11
Circuits and Tunnels
78-18106-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15454

Table of Contents