Table of Contents
Advertisement
16.2 Basic SNMP Components
It is recommended that the SNMP Manager timeout value be set to 60 seconds. Under certain conditions,
Note
if this value is lower than the recommended time, the TCC card can reset. However, the response time
depends on various parameters such as object being queried, complexity, and number of hops in the
node, etc.
Note
In Software Release 8.0 and later, you can retrieve automatic in service (AINS) state and soak time
through the SNMP and Transaction Language One (TL1) interfaces.
Note
The CERENT-MSDWDM-MIB.mib, CERENT-FC-MIB.mib, and CERENT-GENERIC-PM-MIB.mib
in the CiscoV2 directory support 64-bit performance monitoring counters. The SNMPv1 MIB in the
CiscoV1 directory does not contain 64-bit performance monitoring counters, but supports the lower and
higher word values of the corresponding 64-bit counter. The other MIB files in the CiscoV1 and CiscoV2
directories are identical in content and differ only in format.
Figure 16-1
Figure 16-1
16.2 Basic SNMP Components
In general terms, an SNMP-managed network consists of a management system, agents, and managed
devices.
A management system such as HP OpenView executes monitoring applications and controls managed
devices. Management systems execute most of the management processes and provide the bulk of
memory resources used for network management. Additionally, a network might be managed by one or
several management systems.
SNMP agent, and the managed devices.
Cisco ONS 15454 Reference Manual, R8.5
16-2
illustrates the basic layout idea of an SNMP-managed network.
Basic Network Managed by SNMP
Figure 16-2
illustrates the relationship between the network manager, the
Chapter 16
SNMP
78-18106-01
Advertisement
Table of Contents
