1.4.1 Lower Backplane Cover
Figure 1-9
1.4.1 Lower Backplane Cover
The lower section of the ONS 15454 backplane is covered by either a clear plastic protector
(15454-SA-ANSI) or a sheet metal cover (15454-SA-HD), which is held in place by five 6-32 x 1/2 inch
screws. Remove the lower backplane cover to access the alarm interface panel (AIP), alarm pin fields,
frame ground, and power terminals
Figure 1-10
Cisco ONS 15454 Reference Manual, R8.5
1-12
Backplane Covers
B
(Figure
Removing the Lower Backplane Cover
Retaining
screws
Chapter 1
A
1-10).
Shelf and Backplane Hardware
Backplane Sheet Metal
Covers
Lower Backplane
Cover
78-18106-01