Table of Contents
Advertisement
16.7.2 Variable Trap Bindings
Table 16-8
Supported ONS 15454 SNMPv2 Trap Variable Bindings (continued)
Trap Name(s) Associated
Group
with
E
(cont.)
F
performanceMonitor
ThresholdCrossingAlert
(from
CERENT-454-mib)
Cisco ONS 15454 Reference Manual, R8.5
16-14
Variable
Binding
Number
SNMPv2 Variable Bindings
(9)
cerent454AlarmAdditionalInfo
(10)
snmpTrapAddress
(1)
cerent454NodeTime
(2)
cerent454AlarmState
(3)
cerent454AlarmObjectType
(4)
cerent454AlarmObjectIndex
(5)
cerent454AlarmSlotNumber
(6)
cerent454AlarmPortNumber
(7)
cerent454AlarmLineNumber
(8)
cerent454AlarmObjectName
(9)
cerent454ThresholdMonitorType
Chapter 16
Description
Additional information for the
alarm object. In the current
version of the MIB, this object
contains provisioned description
for alarms that are external to the
NE. If there is no additional
information, the value is zero.
The address of the SNMP trap.
The time that an event occurred.
The alarm severity and
service-affecting status.
Severities are Minor, Major, and
Critical. Service-affecting
statuses are Service-Affecting
and Non-Service Affecting.
The entity that raised the alarm.
The NMS should use this value to
decide which table to poll for
further information about the
alarm.
Every alarm is raised by an object
entry in a specific table. This
variable is the index of objects in
each table; if the alarm is
interface-related, this is the index
of the interface in the interface
table.
The slot of the object that raised
the alarm. If a slot is not relevant
to the alarm, the slot number is
zero.
The port of the object that raised
the alarm. If a port is not relevant
to the alarm, the port number is
zero.
The object line that raised the
alarm. If a line is not relevant to
the alarm, the line number is zero.
The TL1-style user-visible name
that uniquely identifies an object
in the system.
This object indicates the type of
metric being monitored.
SNMP
78-18106-01
Advertisement
Table of Contents
