Oc48 Ir/Stm16 Sh As 1310 Card-Level Indicators; Figure; Oc48 Ir/Stm16 Sh As 1310 Faceplate And Block Diagram; Table - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

4.10.1 OC48 IR/STM16 SH AS 1310 Card-Level Indicators

Figure 4-9

OC48IR
STM16SH
AS
1310
FAIL
ACT
SF
TX
1
RX
You can install the OC48 IR/STM16 SH AS 1310 card in Slots 1 to 6 and 12 to 17 and provision the card
as a drop or span card in a two-fiber or four-fiber BLSR, path protection, or ADM (linear) configuration.
The OC-48 port features a 1310-nm laser and contains a transmit and receive connector (labeled) on the
card faceplate. The OC48 IR/STM16 SH AS 1310 uses SC connectors. The card supports 1+1
unidirectional and bidirectional protection switching.
The OC48 IR/STM16 SH AS 1310 detects LOS, LOF, LOP, AIS-L, and RDI-L conditions. The card also
counts section and line BIP errors.
4.10.1 OC48 IR/STM16 SH AS 1310 Card-Level Indicators

Table 4-11

Cisco ONS 15454 Reference Manual, R8.5
4-22

OC48 IR/STM16 SH AS 1310 Faceplate and Block Diagram

OC-48
Optical
Transceiver
Flash
RAM
lists the three card-level LEDs on the OC48 IR/STM16 SH AS 1310 card.
Mux/
Demux
STS-48
BTC
ASIC
Main SCI
uP bus
Protect SCI
uP
Chapter 4 Optical Cards
B
a
c
k
p
l
a
n
e
78-18106-01