Displaying The Startup-Config File - Cisco GSS-4492R-K9 Administration Manual

Chapter 2 Managing the GSS from the CLI

Displaying the startup-config File

OL-10410-01
tacacs-server timeout 5
tacacs-server keepalive-enable
You can review the contents of the GSS startup-config file to display the
configuration used during initial bootup. The GSS stores the contents of the
startup-config file in a safe partition of the hard disk to prevent loss of data due to
power failures.
To display the contents of the GSS startup-config file, enter the following
command:
gssm1.example.com# show startup-config
GSS configuration [Saved: Thu Jul 10 16:20:25 UTC 2003]
interface ethernet 0
ip address
192.168.1.25 255.255.255.0
gss-communications
gss-tcp-keepalives
hostname gssm1.example.com
ip default-gateway 10.86.208.1
ip name-server 172.16.124.122
ssh enable
no ssh keys
no ssh protocol version 1
telnet enable
ftp enable
ftp-client enable all
ntp enable
snmp enable
snmp community-string
<set>
ntp-server 16.1.1.11
cnr enable
Using the startup-config and running-config Files
Cisco Global Site Selector Administration Guide
2-17