Cisco GSS-4492R-K9 Administration Manual page 14

Document Title
Cisco Global Site
Selector Getting Started
Guide
Cisco Global Site
Selector GUI-Based
Global Server
Load-Balancing
Configuration Guide
Cisco Global Site
Selector CLI-Based
Global Server
Load-Balancing
Configuration Guide
Cisco Global Site
Selector Command
Reference
Several of the Cisco CNS Network Registrar (CNR) documents are referenced in
this guide. The CNR version6.2 documentation set consists of the following
documents:
Document Title
Release Notes for the
Cisco CNS Network
Registrar, Release 6.2
Cisco CNS Network
Registrar Installation
Guide
Cisco Global Site Selector CLI-Based Global Server Load-Balancing Configuration Guide
xiv
Description
Information on getting your GSS set up, configured,
and ready to perform global server load balancing.
Procedures on how to configure your primary GSSM
from the GUI to perform global server load
balancing, such as configuring source address lists,
domain lists, answers, answer groups, DNS sticky,
network proximity, and DNS rules. This document
also provides an overview of the GSS device and
global server load balancing as performed by the
GSS.
Procedures on how to configure your primary GSSM
from the CLI to perform global server load balancing,
such as configuring source address lists, domain lists,
answers, answer groups, DNS sticky, network
proximity, and DNS rules. This document also
provides an overview of the GSS device and global
server load balancing as performed by the GSS.
An alphabetical list of all GSS command-line
interface (CLI) commands including syntax, options,
and related commands. This document also describes
how to use the CLI interface.
Description
Information on new software features, installation
updates, caveats, and documentation for the CNR
release.
Information on installing CNR on the supported
operating systems: Windows, Solaris, and Linux.
Preface
OL-10413-01