Modifying A Gss User Account; Deleting A Gss User Account - Cisco GSS-4492R-K9 Administration Manual

Chapter 3 Creating and Managing User Accounts

Modifying a GSS User Account

Deleting a GSS User Account

OL-10410-01
For example, enter:
gss1.example.com(config)# username user_1 password mypwd privilege
admin
User user_1 added.
Repeat Step 3 for each new user account that you want to create.
4.
You can modify a GSS user account from the CLI by using the same procedure
that you followed to create the account (see the
section). Use the username command to enter the full username, password, and
privilege level, substituting the new values for the configuration settings that you
want to change.
For example, enter:
gss1.example.com(config)# username user_1 password newpwd privilege
user
User user_1 exists, change info? [y/n]: y
You can delete an existing user account for accessing the GSS from the CLI by
entering the username command. The GSS restricts you from deleting the
"admin" account.
For example, enter:
gss1.example.com#(config) username user_1 delete
User user_1 removed
Creating and Managing GSS CLI User Accounts
"Creating a GSS User Account"
Cisco Global Site Selector Administration Guide
3-3