Cisco GSS-4492R-K9 Administration Manual page 26

Activating and Modifying GSS Devices
Figure 1-5
4.
5.
Note
Cisco Global Site Selector Administration Guide
1-8
Modifying GSS Details Page
Check the Activate check box. This check box does not appear in the
Modifying GSS details page once the GSS device has been activated.
Click the Submit button, which returns you to the Global Site Selectors list
page (see Figure 1-6). The status of the active GSS device is "Online."
If the device is functioning properly and network connectivity is good
between the device and the primary GSSM, the status of the device changes
to "Online" within approximately 30 seconds.
The device status remains "Inactive" if the device is not functioning
properly or if there are problems with network connectivity. If this occurs,
power cycle the GSS device, check your network connections, and then
repeat this procedure. If you still cannot activate the GSS device, contact
Cisco TAC.
Chapter 1 Managing GSS Devices from the GUI
OL-10410-01