Cisco GSS-4492R-K9 Administration Manual page 27

Chapter 1 Managing GSS Devices from the GUI
Modifying GSS Device Name and Location
OL-10410-01
Figure 1-6 Global Site Selectors List Page—Active Status
Repeat Steps 1 through 5 for each inactive GSS or standby GSSM.
6.
You can modify the name and location of any of your GSS devices using the
primary GSSM GUI. To modify other network information such as the hostname,
IP address, or role, you must access the CLI on that GSS device (see the Cisco
Global Site Selector Getting Started Guide).
To modify the name and location of a GSS device from the primary GSSM GUI,
perform the following steps:
Click the Resources tab.
1.
Click the Global Site Selectors navigation link. The Global Site Selectors list
2.
page appears (see
"Online" status. The GSS devices requiring activation appear with an
"Inactive" status.
Figure 1-4). All active GSS devices appear with an
Cisco Global Site Selector Administration Guide
Activating and Modifying GSS Devices
1-9