Installing Cnr - Cisco GSS-4492R-K9 Administration Manual

Understanding GSS Software Licenses

Installing CNR

Note
Cisco Global Site Selector Administration Guide
2-6
To install CNR, you must first obtain the following:
• GSS license, SF-GSS-DNSLIC
CNR software, CNR-6.3-BASE1K (CNR software 6.3 or higher)
•
CNR license file/key, shipped with the CNR software
•
Your GSS network must be running software version 2.0(2) or higher.
To install CNR on the GSS, perform the following steps:
Specify the license for the CNR module on the GSS as show in the following
1.
example:
gssm1.example.com# license install GSS20070920122230075.lic
To verify the proper installation of the GSS and CNR license, enter the show
license command as follows:
gssm1.example.com# show license installed
License modules are
CNR
Install the CNR software on the GSS.
2.
a. Enable the GSS to serve as an FTP client.
gssm1.example.com# config t
gssm1.example.com (config)# ftp-client enable admin
gssm1.example.com (config)# exit
From the GSS CLI, download the CNR software from the FTP server.
b.
The software is automatically placed in the default FTP directory.
gssm1.example.com# ftp 1.1.1.23
Connected to 1.1.1.23 (1.1.1.23).
220 3Com 3CDaemon FTP Server Version 2.0
Name (1.1.1.23): cisco
331 User name ok, need password
Password:
230 User logged in
Remote system type is UNIX.
Using binary mode to transfer files.
Chapter 2 Managing the GSS from the CLI
OL-10410-01