Common System Log Messages - Cisco GSS-4492R-K9 Administration Manual

Viewing System Logs from the Primary GSSM GUI
Note

Common System Log Messages

Cisco Global Site Selector Administration Guide
8-16
The options and variables are as follows:
• count —Purges all system log messages from the primary GSSM database,
except the specified number of most recently generated log messages.
• number_records_to_keep—Number of system log messages to keep, starting
back from the most recently generated log message, when purging the
primary GSSM database.
days—Purges the system log messages from the primary GSSM database that
•
were generated prior to a specified number of days before today.
number_days_to_keep—Number of days back, starting from today, to retain
•
log messages when purging the primary GSSM database.
For example, to purge all system log messages except for the last three messages,
enter:
gssm1.example.com# gssm database purge-log-records count 3
For example, to purge all system log messages except for those generated within
the last seven days, enter:
gssm1.example.com# gssm database purge-log-records days 7
To verify that the GSS purged the specified system log messages, perform the
following steps:
Click the Tools tab.
1.
Click the System Logs navigation link. The System Log list page appears.
2.
System log messages are purged based on the criteria specified in the gssm
database purge-log-records CLI command.
Table 8-3 lists common GSS system messages that can appear on the System Log
list page. Messages appear alphabetically with a brief description. If you require
more detailed information about a specific system message, contact a Cisco
technical support representative.
Chapter 8 Viewing Log Files
OL-10410-01