Chapter 3 Creating And Managing User Account; Creating A Gss User Account - Cisco GSS-4492R-K9 Administration Manual

Creating and Managing GSS CLI User Accounts

Creating a GSS User Account

Cisco Global Site Selector Administration Guide
3-2
This section contains the following topics:
• Creating a GSS User Account
Modifying a GSS User Account
•
Deleting a GSS User Account
•
When you create a user account from the GSS CLI, specify the new username,
password, and privilege level using the username command. You cannot create a
new account without designating a value for each of these configuration settings.
To create a user account that can log in and access the CLI of a GSS device,
perform the following steps:
Log in to the CLI and enable privileged EXEC mode.
1.
gss1.example.com> enable
gss1.example.com#
Access global configuration mode on the GSS.
2.
gss1.example.com# config
gss1.example.com(config)#
Create and configure your new login account by entering the username
3.
command. The syntax for this command is as follows:
username name {delete | password password privilege {user | admin}}
The arguments and keywords are as follows:
name—Specifies the username that you want to assign or change. Enter an
•
unquoted alphanumeric text string with no spaces and a maximum of 32
characters. Usernames may contain alpha characters (for example, A-Z or
a-z) and/or numerals. Numerals may be present at any position in the name.
delete—Deletes the named user or administrative account.
•
password password—Establishes the password. Specify the password that
•
you want to assign. Enter an unquoted text string with no spaces and a
maximum length of eight characters.
privilege—Sets the user privilege level. To create an administrative account,
•
specify admin. To create a user account, select user.
Chapter 3 Creating and Managing User Accounts
OL-10410-01