Filtering GSS Traffic Using Access Lists
OL-10410-01
Configuring Access Lists and Filtering
GSS Traffic
You can filter incoming traffic received by the GSS by using access lists. You
create access lists at the CLI of each GSS device. This chapter describes how to
create access lists and access groups to filter GSS traffic.
It contains the following major sections:
Filtering GSS Traffic Using Access Lists
•
Deploying GSS Devices Behind Firewalls
•
This section contains the following topics:
•
Access List Overview
Creating an Access List
•
•
Associating an Access List with a GSS Interface
Disassociating an Access List from a GSS Interface
•
Adding Rules to an Access List
•
Removing Rules from an Access List
•
Segmenting GSS Traffic by Ethernet Interface
•
Segmenting GSS Traffic by Ethernet Interface
•
Displaying Access Lists
•
C H A P T E R
Cisco Global Site Selector Administration Guide
5
5-1