Displaying Gss Processes - Cisco GSS-4492R-K9 Administration Manual

Chapter 2 Managing the GSS from the CLI

Displaying GSS Processes

OL-10410-01
Table 2-2 Field Descriptions for show boot-config Command
Field
Label
GSS Software Version
Root Partition
Linux Kernel
Default Boot Image
You can display a list of internal GSS device processes by using the show
processes command.
gssm1.example.com# show processes
Table 2-3 describes the fields in the show processes output.
Table 2-3 Field Descriptions for show processes Command
Field
Name
PID
MEM
CPUTIME
START
Displaying GSS System Configuration Information
Description
GSS software version that appears at the LILO
prompt.
Current GSS software version associated with the
Label.
Device used for the Linux root partition (the core of
the Linux file system).
Version of the Linux kernel used by the GSS
software image.
Listed software version of the default boot image for
the GSS device.
Description
Name of the GSS subsystem, per operating system
process.
Process identifier.
Percentage of memory used by the process.
Amount of CPU time used since the start of the
process.
Date or time when the process started.
Cisco Global Site Selector Administration Guide
2-49