Cisco GSS-4492R-K9 Administration Manual page 122

Configuring a TACACS+ Server for Use with the GSS
To define CLI command privileges for the GSS from the Cisco Secure ACS,
perform the following steps:
1.
2.
Figure 4-3
3.
Cisco Global Site Selector Administration Guide
4-8
Chapter 4
Access the Group Setup section of the Cisco Secure ACS interface, then
access the Group Setup page. Select the group for which you want to
configure TACACS+ settings, then click Edit Settings. The Edit page
appears.
Scroll to the Shell Command Authorization Set section of the Group Setup
page (see Figure 4-3).
Shell Command Authorization Set Section of Group Setup Page
Click the Per Group Command Authorization check box.
Managing GSS User Accounts Through a TACACS+ Server
OL-10410-01