Cisco GSS-4492R-K9 Administration Manual page 199

Chapter 8 Viewing Log Files
The following is an example of the host syslog message format generated by a
GSS. The fields are described in
<IP or DNS name of Device> <BLANK> <:> <Time Stamp> <BLANK><:>
%FACILITY-SEVERITY-MNEMONIC <:> Message-text
Table 8-4
Field
IP or DNS name of
Device
Time Stamp
%FACILITY
SEVERITY
MNEMONIC
Message-text
OL-10410-01
Viewing GSS System Logs Using CiscoWorks RME Syslog Analyzer
Table
Syslog Message Format
Description
IP address or DNS name, followed by one BLANK space,
and followed by a colon (:)
Nonoptional timestamp in the format:
yyyy mmm dd hh:mm:ss (for example,
)
19:20:10
or
mmm dd hh:mm:ss (for example,
Code consisting of two or more uppercase letters that
indicate the facility to which the message refers. A
facility can be a hardware device, a protocol, or a module
of the system software (for example,
).
STK
This is not the syslog server logging facility.
Note
Single-digit code from 0 to 7 that reflects the severity of
the condition. The severity maps to the GSS logging level
specified using the logging host priority command.
Code that uniquely identifies the error message (for
example,
TCPTRANS
Text string describing the condition (for example,
KAL_RSP_OK [192.168.100.1] numSuccessfulProbes:2
or
Detected Ssh is stopped but should be started
Cisco Global Site Selector Administration Guide
8-4.
MAY 14 19:20:10
KAL
, ,
GUIEXCEPTION KALPING
2005 MAY 14
)
, , ,
TOMCAT SYS
).
)
8-19