Displaying Memory Information - Cisco GSS-4492R-K9 Administration Manual

Chapter 2 Managing the GSS from the CLI

Displaying Memory Information

OL-10410-01
To obtain specific license file details, enter:
gssm1.example.com# show license file-name ddos_new.lic
FEATURE ddos cisco 1 permanent uncounted HOSTID=ANY \
NOTICE="<LicFileID>ddos_new.lic</LicFileID><LicLineID>0</LicLineID> \
<PAK>1XIOS2C84AB</PAK>" SIGN=CFF95D462F42
To obtain a complete picture of the licenses installed in the GSS network from the
primary GSS, enter:
gssm1.example.com# show license gss-all
Own (Primary GSS) info :
Pak number is :
1XIOS2C81AB
DDoS Installed, Active
CNR Installed, Active
Other GSS info :
Address : 2.7.0.2
Pak number are :
1XIOS2C87AB
DDoS Installed, Active
CNR Installed, Active
Address : 2.3.0.2
Pak number is:
1XIOS2C83AB
DDoS Installed, Active
CNR Installed, Active
You can display information about the GSS memory blocks and statistics by using
the show memory command.
gssm1.example.com# show memory
Table 2-1 describes the fields in the show memory output.
Table 2-1 Field Descriptions for show memory Command
Field
Memory:
total
Displaying GSS System Configuration Information
Description
Total usable megabytes of RAM on the GSS.
Cisco Global Site Selector Administration Guide
2-47