Deleting Gss Devices - Cisco GSS-4492R-K9 Administration Manual

Activating and Modifying GSS Devices

Deleting GSS Devices

Cisco Global Site Selector Administration Guide
1-10
Click the Modify GSS icon for the first GSS to activate. The Modifying GSS
3.
details page appears (see
In the Global Site Selector Name field, enter a new name for the device. You
4.
use the device name to easily distinguish one GSS device from another in the
primary GSSM list pages, where many devices may appear together.
From the Location drop-down list, choose a new device location.
5.
Click Submit to save your changes, and return to the Global Site Selector list
6.
page.
Deleting a GSS device such as a GSS or a standby GSSM allows you to remove
the nonfunctioning device from your network or reconfigure and then reactivate a
GSS device. With the exception of the primary GSSM, you can delete GSS
devices from your network through the primary GSSM GUI.
To delete a GSS device from the primary GSSM GUI, perform the following
steps:
Click the Resources tab.
1.
Click the Global Site Selectors navigation link. The Global Site Selectors list
2.
page appears.
3. Click the Modify GSS icon located to the left of the GSS device you want to
delete. The Modifying GSS details page appears.
4. Click the Delete icon in the upper right corner of the page. The GSS software
prompts you to confirm your decision to delete the GSS device.
Click OK to confirm your decision and return to the Global Site Selectors list
5.
page. The deleted device is removed from the list.
To reconfigure the GSS device, see the Cisco Global Site Selector Getting Started
Guide.
Chapter 1 Managing GSS Devices from the GUI
Figure 1-5).
OL-10410-01